multimonitor i3 with polybar

i3/.config/i3/config

@@ -147,6 +147,12 @@ bindsym $mod+Shift+8 move container to workspace number $ws8
 bindsym $mod+Shift+9 move container to workspace number $ws9
 bindsym $mod+Shift+0 move container to workspace number $ws10
 
+# move workspace to another output/monitor
+bindsym $mod+Control+Up    move workspace to output up
+bindsym $mod+Control+Down  move workspace to output down
+bindsym $mod+Control+Left  move workspace to output left
+bindsym $mod+Control+Right move workspace to output right
+
 # reload the configuration file
 bindsym $mod+Shift+c reload
 # restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
@@ -211,12 +217,16 @@ exec_always "xset s noblank"
 exec_always "xset r rate 280 30" # keyboard key repeat <delay> <speed>
 
 # set touchpad tap to click to Enabled
-exec_always "xinput set-prop '06CB0001:00 06CB:7FB4 Touchpad' 333 1"
+exec_always "xinput set-prop '06CB0001:00 06CB:7FB4 Touchpad' 'libinput Tapping Enabled' 1"
-#exec_always "xinput set-prop '06CB0001:00 06CB:7FB4 Touchpad' 332 1"
+exec_always "xinput set-prop '06CB0001:00 06CB:7FB4 Touchpad' 'libinput Scrolling Pixel Distance' 15"
-#exec_always "xinput set-prop '06CB0001:00 06CB:7FB4 Touchpad' 331 1"
 
 # Setup keyboard layout changing
 exec_always "setxkbmap -layout us,cz -variant ,qwerty -option 'grp:alt_shift_toggle'"
 
 # Policy Kit Agent for GUI apps running as root
 exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &
+
+
+
+exec --no-startup-id i3-msg 'workspace 1:Web; exec /usr/bin/firefox'
+exec --no-startup-id i3-msg 'workspace 2:Discord; exec /usr/bin/discord'

nvim/.config/nvim/init.vim

@@ -288,7 +288,7 @@ augroup omnisharp_commands
   autocmd FileType cs nmap <silent> <buffer> <Leader>ossp <Plug>(omnisharp_stop_server)
 
   "autocmd FileType cs nmap <silent> <buffer> <F5>:vs | term dotnet run
-  autocmd FileType cs nmap <buffer> <Leader>run :vs<CR>:term dotnet run<CR>
+  autocmd FileType cs nmap <buffer> <Leader>run :vs<CR>:w<CR>:term dotnet run<CR>
 
 augroup END
 

polybar/.config/polybar/config

@@ -27,16 +27,16 @@ primary = #ffb52a
 secondary = #e60053
 alert = #bd2c40
 
-[bar/mybar]
+[bar/primarybar]
 ; Use either of the following command to list available outputs:
 ; If unspecified, the application will pick the first one it finds.
 ; $ polybar -m | cut -d ':' -f 1
 ; $ xrandr -q | grep " connected" | cut -d ' ' -f1
 ; If no monitor is given, the primary monitor is used if it exists
-;monitor = ${env:MONITOR:HDMI-1}
+monitor = ${env:MONITOR:eDP1}
 
 ; Use the specified monitor as a fallback if the main one is not found.
-;monitor-fallback =
+; monitor-fallback = ${env:MONITOR:eDP1}
 
 ; Require the monitor to be in connected state
 ; XRandR sometimes reports my monitor as being disconnected (when in use)
@@ -62,7 +62,7 @@ bottom = false
 ; more space.
 ; When false, the center block is centered in the space between 
 ; the left and right block.
-fixed-center = true
+fixed-center = false
 
 ; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
 ; the percentage can optionally be extended with a pixel offset like so:
@@ -159,7 +159,7 @@ modules-right = xbacklight alsa pulseaudio cpu memory filesystem temperature wla
 
 ; The separator will be inserted between the output of each module
 ; This has the same properties as a label
-separator =
+separator = 
 
 ; Opacity value between 0.0 and 1.0 used on fade in/out
 dim-value = 1.0
@@ -197,7 +197,7 @@ tray-offset-x = 0
 tray-offset-y = 0
 
 ; Pad the sides of each tray icon
-tray-padding = 2
+tray-padding = 1
 
 ; Scale factor for tray clients
 tray-scale = 1.0
@@ -216,6 +216,10 @@ tray-scale = 1.0
 cursor-click = pointer
 cursor-scroll = ns-resize
 
+;end of [bar/mybar]
+
+
+
 [module/xwindow]
 type = internal/xwindow
 label = %title:0:30:...%
@@ -265,7 +269,7 @@ index-sort = true
 wrapping-scroll = false
 
 ; Only show workspaces on the same output as the bar
-;pin-workspaces = true
+pin-workspaces = true
 
 label-mode-padding = 2
 label-mode-foreground = #000
@@ -569,4 +573,197 @@ screenchange-reload = true
 margin-top = 5
 margin-bottom = 5
 
+
+
+
+[bar/secondarybar]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+; If no monitor is given, the primary monitor is used if it exists
+monitor = ${env:MONITOR:HDMI1}
+
+; Use the specified monitor as a fallback if the main one is not found.
+; monitor-fallback = ${env:MONITOR:eDP1}
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Use fuzzy matching for monitors (only ignores dashes -)
+; Useful when monitors are named differently with different drivers.
+monitor-exact = true
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+; Note: With this most WMs will no longer reserve space for 
+; the bar and it will overlap other windows. You need to configure
+; your WM to add a gap where the bar will be placed.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block. 
+; The center block will stay in the middle of the bar whenever
+; possible. It can still be pushed around if other blocks need
+; more space.
+; When false, the center block is centered in the space between 
+; the left and right block.
+fixed-center = false
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 100%
+height = 27
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+;offset-x = 1%
+;offset-y = 1%
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${colors.background}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${colors.foreground}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+background-0 =
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded. For this to work you may also need to enable 
+; pseudo-transparency or use a compositor like compton.
+; Individual values can be defined using:
+;   radius-{top,bottom}
+; or
+;   radius-{top,bottom}-{left,right} (unreleased)
+; Polybar always uses the most specific radius definition for each corner.
+radius = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 3
+line-color = #f00
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed within this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+; border-size can be defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in 50% minus 10 pixels. The percentage is relative
+; to the monitor width or height depending on the border direction.
+border-size = 0
+border-color = #00000000
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+;padding = 0
+padding-left = 0
+padding-right = 4
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+;module-margin = 0
+module-margin-left = 1
+module-margin-right = 1
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = NotoSans-Regular:size=8;2
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+font-0 = Verdana:pixelsize=10;1
+font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
+font-2 = siji:pixelsize=10;1
+;font-3 = FontAwesome:size=10;1
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+modules-left = bspwm i3
+modules-center = 
+; modules-right = xbacklight alsa pulseaudio cpu memory filesystem temperature wlan eth battery xkeyboard date
+modules-right = date
+
+; The separator will be inserted between the output of each module
+; This has the same properties as a label
+separator = 
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = cs_CZ.UTF-8
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = center
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+
+tray-maxsize = 16
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${root.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 1
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+;wm-restack = bspwm
+;wm-restack = i3
+
+;override-redirect = true
+
+;scroll-up = bspwm-desknext
+;scroll-down = bspwm-deskprev
+
+;scroll-up = i3wm-wsnext
+;scroll-down = i3wm-wsprev
+
+cursor-click = pointer
+cursor-scroll = ns-resize
+
 ; vim:ft=dosini

polybar/.config/polybar/launch.sh

@@ -5,8 +5,15 @@ killall -q polybar
 # If all your bars have ipc enabled, you can also use 
 # polybar-msg cmd quit
 
-# Launch bar1 and bar2
+#echo "---" | tee -a /tmp/polybar.log 
-echo "---" | tee -a /tmp/polybar.log 
+
-polybar mybar 2>&1 | tee -a /tmp/polybar.log & disown
+#for MON in $(xrandr -q | grep " connected" | cut -d ' ' -f1); do
+    #MONITOR=$MON polybar mybar 2>&1 | tee -a "/tmp/polybar$MON.log" & disown
+#done
+
+#MONITOR="eDP1" polybar mybar 2>&1 | tee -a "/tmp/polybar.log" & disown
+
+polybar primarybar 2>&1 | tee -a "/tmp/polybar.log" & disown
+polybar secondarybar 2>&1 | tee -a "/tmp/polybarHDMI.log" & disown
 
 echo "Bars launched..."